Skip to main content


Icon Legend
This session is not in your schedule.
This session is in your schedule. Click again to remove it.

  • Thursday, Oct 9th
    8:30 AM - 10:00 AM PDT
    Microphysiological Systems (MPS) Biomanufacturing
    Location: Room 24A
    Track Chair: Shengjie Zhai – University of Nevada Las Vegas
    Track Chair: Brenda M. Ogle, PhD – University of Minnesota
    Session Chair: George Christ, PhD – University of Virginia
    Biomanufacturing
  • Thursday, Oct 9th
    8:30 AM - 8:45 AM PDT
    A Vascularized Placenta-on-a-Chip for Metabolomic Profiling of Environmental Metal-Induced Placental Dysregulation During Pregnancy
    Location: Room 24A
    Presenting Author: Pouria Fattahi, PhD – University of Georgia
    Co-Author: Mousa Younesi – University of Pennsylvania
    Co-Author: Se-jeong Kim – University of Pennsylvania
    Co-Author: Lauren Aleksunes – Rutgers University
    Last Author: Dan Dongeun Huh – University of Pennsylvania
    Primary Investigator: Dan Dongeun Huh – University of Pennsylvania
    Biomanufacturing
  • Thursday, Oct 9th
    8:45 AM - 9:00 AM PDT
    A universal organ-on-a-chip system for non-invasive near real-time spatial profiling of tissue microenvironments
    Location: Room 24A
    Presenting Author: Jose Ayuso – University of Wisconsin - Madison
    Co-Author: Seth Zima, MS – University of Wisconsin - Madison
    Co-Author: Rithvik Turaga, M.S. Biomedical Engineering – University of Wisconsin-Madison
    Last Author: Jose Ayuso – University of Wisconsin - Madison
    Primary Investigator: Jose Ayuso – University of Wisconsin - Madison
    Biomanufacturing
  • Thursday, Oct 9th
    9:00 AM - 9:15 AM PDT
    Engineering functional human midbrain organoids using vascular networks-inspired scaffolds
    Location: Room 24A
    Presenting Author: Feng Guo, PhD – Indiana University Bloomington
    Last Author: Feng Guo, PhD – Indiana University Bloomington
    Biomanufacturing
  • Thursday, Oct 9th
    9:15 AM - 9:30 AM PDT
    A Novel Microfluidic Chip to Induce Linear Concentration Gradients for Differentiation of Cochlear Cells on Inner Ear Organoids
    Location: Room 24A
    Presenting Author: Daniela Freire, MS – University of Miami
    Co-Author: Neil Kumar – University of Miami
    Co-Author: Pei-Ciao Tang – University of Miami
    Last Author: Ashutosh Agarwal – University of Miami
    Biomanufacturing
  • Thursday, Oct 9th
    9:30 AM - 9:45 AM PDT
    Engineering High Cell Density Beating Cords of Cardiomyocytes and Fibroblasts via Photopatterned Alginate
    Location: Room 24A
    Presenting Author: Emanuele Spanghero, MS – University of Illinois Chicago
    Co-Author: Derrick M. Wells – University of Illinois at Chicago
    Co-Author: Yong Duk Han – Systemic Bio
    Last Author: Eben Alsberg – University of Illinois Chicago
    Primary Investigator: Salman Khetani – University of Illinois Chicago
    Biomanufacturing
  • Thursday, Oct 9th
    9:45 AM - 10:00 AM PDT
    In Vitro Liver Toxicology Testing of Rat and Dog Hepatocytes to Reduce In Vivo Regulatory Requirements
    Location: Room 24A
    Presenting Author: Owen Lally, BS – University of Illinois Chicago
    Co-Author: Paul Deford – Corteva Agriscience
    Co-Author: Josiah McKenna – Corteva Agriscience
    Co-Author: Jeremy Fitzpatrick – Corteva
    Co-Author: Zachary Sutake – Corteva
    Co-Author: Enrica Bianchi – Corteva
    Primary Investigator: Salman Khetani – University of Illinois Chicago
    Biomanufacturing
  • Thursday, Oct 9th
    10:00 AM - 11:00 AM PDT
    Biomanufacturing - Posters
    Location: Exhibit Hall F, G & H
    Track Chair: Shengjie Zhai – University of Nevada Las Vegas
    Track Chair: Brenda M. Ogle, PhD – University of Minnesota
    Biomanufacturing
  • Thursday, Oct 9th
    10:00 AM - 11:00 AM PDT
    D1 - Voxelated Bioprinting: Digital Assembly of Spherical Viscoelastic Bio-ink Particles
    Location: Exhibit Hall F, G & H
    Presenting Author: Jinchang Zhu – University of Virginia
    Primary Investigator: Jinchang Zhu – University of Virginia
    Last Author: Liheng Cai – University of Virginia
    Biomanufacturing
  • Thursday, Oct 9th
    10:00 AM - 11:00 AM PDT
    D3 - Conversation of Seafood Waste to Polyhydroxyalkanoates Using Bioreactor Culture Methods
    Location: Exhibit Hall F, G & H
    Presenting Author: Aiden Morgado – University of Massachusetts Dartmouth
    Co-Author: Abid Neron – University of Massachusetts Dartmouth
    Last Author: Christopher Brigham – University of Massachusetts Dartmouth
    Biomanufacturing
  • Thursday, Oct 9th
    10:00 AM - 11:00 AM PDT
    D4 - Biofabrication of Small-diameter Vascular Graft with Acellular Human Amniotic Membrane: A Proof-of-Concept Study in Pig
    Location: Exhibit Hall F, G & H
    Presenting Author: Bo Wang – Medical college of Wisconsin
    Last Author: Bo Wang – Medical college of Wisconsin
    Primary Investigator: Bo Wang – Medical college of Wisconsin
    Co-Author: O Aung – Medical college of wisconsin
    Biomanufacturing
  • Thursday, Oct 9th
    10:00 AM - 11:00 AM PDT
    D5 - Suspension-based Cardiac Differentiation of hiPSCs Using Scaffold-Free Aggregates and Hydrogel Microspheres Impacts Cell Populations, Cardiomyocyte Yield, Reproducibility, and Functional Properties
    Location: Exhibit Hall F, G & H
    Presenting Author: Elizabeth Lipke – Auburn University
    Co-Author: Shireen Shireen, MS – Auburn University
    Biomanufacturing
  • Thursday, Oct 9th
    10:00 AM - 11:00 AM PDT
    D6 - Development of DNA Aptamers Targeting Human Mesenchymal Stem Cells and Saos-2 Osteosarcoma Cells Using Cell-SELEX
    Location: Exhibit Hall F, G & H
    Presenting Author: Thanusha AV, PhD – Case Western Reserve University
    Co-Author: Rodrigo Somoza, PhD – Case Western Reserve University
    Last Author: Rodrigo Somoza, PhD – Case Western Reserve University
    Biomanufacturing
  • Thursday, Oct 9th
    10:00 AM - 11:00 AM PDT
    D6 - Oxygen Sensors Embedded Within Tissue Engineering Scaffolds for Real-Time Monitoring of Cellular Microenvironments
    Location: Exhibit Hall F, G & H
    Presenting Author: Thanusha AV, PhD – Case Western Reserve University
    Co-Author: Jim Berilla – Case Western Reserve University
    Co-Author: Rodrigo Somoza, PhD – Case Western Reserve University
    Co-Author: Sungwoo Cho, BS – Case Western Reserve University
    Co-Author: Harihara Baskaran, PhD – CWRU
    Co-Author: Jean Welter, MD PhD – Case Western Reserve University
    Last Author: Jean Welter, MD PhD – Case Western Reserve University
    Biomanufacturing
  • Thursday, Oct 9th
    10:00 AM - 11:00 AM PDT
    D8 - Non-Destructively Assessing Microcarrier Occupancy Using Average Acoustic Pulse Dispersion Length
    Location: Exhibit Hall F, G & H
    Presenting Author: Jean Welter, MD PhD – Case Western Reserve University
    Co-Author: Jonathan Kenyon, PhD – Case Western Reserve University
    Last Author: Joseph Mansour, PhD – Case Western Reserve University
    Biomanufacturing
  • Thursday, Oct 9th
    10:00 AM - 11:00 AM PDT
    D9 - Fabrication and Characterization of Nuclear Pasta-Inspired Biodegradable Scaffolds for Bone Tissue Engineering
    Location: Exhibit Hall F, G & H
    Presenting Author: Hamzeh Al-Qawasmi – Marshall University
    Co-Author: Roozbeh Salary, N/A, Ph.D. – Marshall University (West Virginia State)
    Primary Investigator: Roozbeh Salary, N/A, Ph.D. – Marshall University (West Virginia State)
    Biomanufacturing
  • Thursday, Oct 9th
    10:00 AM - 11:00 AM PDT
    C17 - Hybrid bioprinting of hierarchical vascular networks at capillary-scale resolutions
    Location: Exhibit Hall F, G & H
    Presenting Author: Yuxuan Liao – University of Notre Dame
    Co-Author: Salvador Gallegos Martínez – Harvard Medical School
    Co-Author: Xiao Kuang, PhD – University of Wisconsin-Madison
    Co-Author: Yipu Du – University of Notre Dame
    Co-Author: Yu Shrike Zhang – Harvard Medical School
    Co-Author: Yanliang Zhang – University of Notre Dame
    Last Author: Yanliang Zhang – University of Notre Dame
    Biomanufacturing
  • Thursday, Oct 9th
    10:00 AM - 11:00 AM PDT
    C18 - Machine learning-assisted analyses for identification and prediction of genomic abnormalities in human pluripotent stem cell populations
    Location: Exhibit Hall F, G & H
    Presenting Author: Raj R. Rao, Ph.D. – University of Arkansas, Fayetteville
    Co-Author: Sabrina Saitta – University of Arkansas, Fayetteville
    Primary Investigator: Raj R. Rao, Ph.D. – University of Arkansas, Fayetteville
    Biomanufacturing
  • Thursday, Oct 9th
    10:00 AM - 11:00 AM PDT
    D11 - Mechanoporation based delivery of CRISPR to generate gene-edited CAR T cells in normal and patient donor cells.
    Location: Exhibit Hall F, G & H
    Presenting Author: Todd Sulchek – Georgia Institute of Technology
    Co-Author: Tong Yu – Georgia Tech
    Co-Author: Sunil Raikar – Emory University
    Biomanufacturing
  • Thursday, Oct 9th
    10:00 AM - 11:00 AM PDT
    D13 - Energy-Guided Cell Sorting in ATPS: Application to Chondrocytes and Model Particles
    Location: Exhibit Hall F, G & H
    Presenting Author: Nehal Abu-Lail – University of Texas at San Antonio
    Last Author: Nehal Abu-Lail – University of Texas at San Antonio
    Co-Author: Jimena Alegria – The University of Texas at San Antonio
    Co-Author: Gabriel Garibaldi – University of Texas at San Antonio
    Co-Author: Anita Shayan – University of Texas at San Antonio
    Co-Author: Robert Stannert – University of Texas at San Antonio
    Co-Author: Gongchen Sun – University of Texas at San Antonio
    Primary Investigator: Gongchen Sun – University of Texas at San Antonio
    Biomanufacturing
  • Thursday, Oct 9th
    3:45 PM - 5:15 PM PDT
    Biomaterials for Cell Manufacturing and Tissue Biofabrication
    Location: Room 24A
    Track Chair: Shengjie Zhai – University of Nevada Las Vegas
    Track Chair: Brenda M. Ogle, PhD – University of Minnesota
    Session Chair: Jeffrey G. Jacot, PhD – University of Colorado Anschutz Medical Campus
    Session Chair: Ali Salifu – Boston College
    Biomanufacturing
  • Thursday, Oct 9th
    3:45 PM - 4:00 PM PDT
    Effects of granular hydrogel shapes on jammed based extrusion printing
    Location: Room 24A
    Presenting Author: Raza ur Rehman Syed, Phd Candidate – TX A&M College Station
    Co-Author: John Soukar – Texas A&M University
    Co-Author: Saptarshi Biswas, B.Tech, M.Tech, M.S. – Texas A&M University
    Co-Author: Gene T. Felix – Gaharwar Laboratory
    Co-Author: Ryan Davis – Texas A&M University
    Co-Author: Kayla Dixon – Gaharwar Laboratory
    Co-Author: Vibhav Jaripatke – The Gaharwar Lab
    Co-Author: Akhilesh Gaharwar – Texas A&M University
    Primary Investigator: Akhilesh Gaharwar – Texas A&M University
    Biomanufacturing
  • Thursday, Oct 9th
    4:00 PM - 4:15 PM PDT
    Ultrasound-Responsive Biomaterials for Controlled Genetic Manipulation of 3D-Biofabricated Tumor Models with Vascular Structures
    Location: Room 24A
    Presenting Author: Holly Day – Oregon Health and Science University
    Co-Author: Mary K. Lowrey – Oregon Health & Science University
    Co-Author: Kira Lynch – Oregon Health & Science University
    Co-Author: Kevin Schilling, PhD – Oregon Health& Science University
    Last Author: Carolyn Schutt, PhD – Oregon Health & Science University
    Primary Investigator: Carolyn Schutt, PhD – Oregon Health & Science University
    Co-Author: Cristiane Franca – Oregon Health & Science University
    Biomanufacturing
  • Thursday, Oct 9th
    4:15 PM - 4:30 PM PDT
    Engineering Thick Myocardial Tissues with 3D Printed Perfusable Vascular Networks
    Location: Room 24A
    Presenting Author: Bing Ren, PhD – The George Washington University
    Co-Author: Shengbo Guo – The George Washington University
    Co-Author: Shuaiqi Song – The George Washington University
    Last Author: Lijie Zhang – The George Washington University
    Primary Investigator: Lijie Zhang – The George Washington University
    Biomanufacturing
  • Thursday, Oct 9th
    4:30 PM - 4:45 PM PDT
    Porous Microparticles with a Leaf-Stacked Structure Enhance Cell Spheroid Formation and Function
    Location: Room 24A
    Presenting Author: Min Ji Kim, PhD – Mayo Clinic
    Co-Author: Quoc Huynh Nguyen, PhD – Mayo Clinic
    Co-Author: Se Heang Oh, n/a – Dankook University
    Co-Author: Gulnaz Stybayeva – Mayo Clinic
    Last Author: Alexander Revzin – Mayo Clinic
    Primary Investigator: Alexander Revzin – Mayo Clinic
    Biomanufacturing
  • Thursday, Oct 9th
    4:45 PM - 5:00 PM PDT
    Engineering a 4D-Printed Culture Scaffold with Dual Stimuli for Modulating Cellular Differentiation
    Location: Room 24A
    Presenting Author: Shengbo Guo – The George Washington University
    Co-Author: Tarun Agarwal – The George Washington University
    Co-Author: Shuaiqi Song – The George Washington University
    Co-Author: Bing Ren, PhD – The George Washington University
    Last Author: Lijie Zhang – The George Washington University
    Primary Investigator: Lijie Zhang – The George Washington University
    Biomanufacturing
  • Thursday, Oct 9th
    5:00 PM - 5:15 PM PDT
    Raw Material Selection Is Critical for Clinical Trial Success
    Location: Room 24A
    Invited Speaker: Russell Marians – Gates Biomanufacturing Facility/University of Colorado Anschutz Medical Campus
    Biomanufacturing
  • Friday, Oct 10th
    8:30 AM - 10:00 AM PDT
    Cellular Biomanufacturing
    Location: Room 24A
    Track Chair: Shengjie Zhai – University of Nevada Las Vegas
    Track Chair: Brenda M. Ogle, PhD – University of Minnesota
    Session Chair: Yonghui Ding – Worcester Polytechnic Institute
    Session Chair: Bo Wang – Medical college of Wisconsin
    Biomanufacturing
  • Friday, Oct 10th
    8:30 AM - 8:45 AM PDT
    Biomanufacturing and Curcumin-loading of Human Choroid Plexus Organoid-derived Extracellular Vesicles from a Vertical Wheel Bioreactor to Alleviate Neuro-inflammation
    Location: Room 24A
    Presenting Author: Justice Ene – FAMU-FSU College of Engineering
    Co-Author: Laureana Muok – FAMU-FSU College Of Engineering
    Co-Author: Vanessa Gonzalez – FAMU-FSU College Of Engineering
    Co-Author: Nicolas Sanchez – FAMU-FSU College Of Engineering
    Co-Author: Tristan Driscoll, PhD – FAMU-FSU College Of Engineering
    Last Author: Yan Li – FAMU-FSU College Of Engineering
    Primary Investigator: Yan Li – FAMU-FSU College Of Engineering
    Biomanufacturing
  • Friday, Oct 10th
    8:45 AM - 9:00 AM PDT
    High-yield Mass Production of High-quality Homogenous Human iPSC Spheroids Under Chemical-free 3D Culture Enabled by Micropatterning and Cold-triggered Detachment
    Location: Room 24A
    Presenting Author: Mitsuo Kumagai – University of Maryland, College Park
    Co-Author: Zhiyuan Wang – University of Maryland College Park
    Primary Investigator: Xiaoming He, Ph.D. – University of Maryland, College Park
    Co-Author: Samantha Stewart – UMDCP
    Biomanufacturing
  • Friday, Oct 10th
    9:00 AM - 9:15 AM PDT
    Comparative Characterization of Placental Mesenchymal Stromal Cell-Derived Extracellular Vesicles From 3D Hollow Fiber Bioreactor and 2D Tissue Flask Culture
    Location: Room 24A
    Presenting Author: David Wang – UC Davis
    Co-Author: Blaine Baker – UC Davis
    Co-Author: Emma G. Loll – UC Davis
    Last Author: Aijun Wang, Ph.D. – UC Davis
    Primary Investigator: Aijun Wang, Ph.D. – UC Davis
    Co-Author: Kaitlin Clark
    Co-Author: Yuguo Lei, PHD – Penn State University
    Co-Author: Diana Farmer
    Biomanufacturing
  • Friday, Oct 10th
    9:15 AM - 9:30 AM PDT
    Preconditioning Mesenchymal Stem Cells with Mechanical Stimulation Increases their Potency for the Treatment of Osteoporosis
    Location: Room 24A
    Presenting Author: Vitali V. Maldonado – University of Arkansas
    Co-Author: David Heinrichs – University of Arkansas
    Primary Investigator: Rebekah Margaret Samsonraj – University of Arkansas, Fayetteville
    Biomanufacturing
  • Friday, Oct 10th
    9:30 AM - 9:45 AM PDT
    Scalable, Power-Free Osmotic Filtration Platforms for Biomanufacturing-Ready Isolation of Extracellular Vesicles and Biomarkers
    Location: Room 24A
    Presenting Author: James J. Lai, PhD – National Taiwan University of Science and Technology
    Last Author: James J. Lai, PhD – National Taiwan University of Science and Technology
    Co-Author: Casey Huang – National Taiwan University of Science and Technology
    Co-Author: Helen Nguyen – Taipei Medical University
    Co-Author: Samuel Chen – Georgia Institute of Technology
    Co-Author: David J. Lundy – Taipei Medical University
    Biomanufacturing
  • Friday, Oct 10th
    9:45 AM - 10:00 AM PDT
    Lightning Rod Approach: Enhanced Cell Selective Low-Voltage Electroporation for In-Vivo Cell Manufacturing
    Location: Room 24A
    Presenting Author: Vaishali Malik, MS – University of Massachusetts Amherst
    Co-Author: Ritam Das – University of Massachusetts Am
    Co-Author: Badal Singh – University of Massachusetts
    Last Author: S. Thayumanavan – University of Massachusetts
    Primary Investigator: Govind Srimathveeravalli – University of Massachusetts Amherst
    Biomanufacturing
  • Friday, Oct 10th
    10:00 AM - 4:30 PM PDT
    Biomanufacturing - Posters
    Location: Exhibit Hall F, G & H
    Biomanufacturing
  • Friday, Oct 10th
    10:00 AM - 11:00 AM PDT
    C1 - Optimization of Drying Techniques for Nanocellulose Molding
    Location: Exhibit Hall F, G & H
    Presenting Author: Nathan Arruda – University of Massachusetts Dartmouth Biomedical Engineering Society
    Co-Author: Karim Loji – University of Massachusetts Dartmouth
    Co-Author: Henry Moye – University of Massachusetts Dartmouth
    Biomanufacturing
  • Friday, Oct 10th
    10:00 AM - 11:00 AM PDT
    C2 - Efficiently Optimizing Bioprocess Parameters to Maximize Viable Cell Density Curves: Operate Smarter Using Functional Data Analysis
    Location: Exhibit Hall F, G & H
    Presenting Author: John Cunningham – JMP
    Biomanufacturing
  • Friday, Oct 10th
    10:00 AM - 11:00 AM PDT
    C3 - Metabolome and Secretome of MSCs Cultured on Hydrogels with Varied Stiffness
    Location: Exhibit Hall F, G & H
    Presenting Author: Reesha Kakkadavath Vayalakkara, PhD – Georgia Institute of Technology
    Co-Author: Joseph Corstvet – Georgia Institute of Technology
    Co-Author: Facundo Fernandez, PhD – School of Chemistry and Biochemistry. Georgia Institute of Technology
    Last Author: Johnna Temenoff – Georgia Tech/Emory University
    Primary Investigator: Johnna Temenoff – Georgia Tech/Emory University
    Biomanufacturing
  • Friday, Oct 10th
    10:00 AM - 11:00 AM PDT
    C4 - Mature Cardiac Cell Manufacture for Cardiotoxicity Screening
    Location: Exhibit Hall F, G & H
    Presenting Author: Carlos Barreto-Gamarra, n/a – University of Puerto Rico Recinto - Mayaguez
    Primary Investigator: Maribella Domenech – University of Puerto Rico
    Biomanufacturing
  • Friday, Oct 10th
    10:00 AM - 11:00 AM PDT
    C5 - Developing new cryopreservation strategies and formulations for cell therapy applications
    Location: Exhibit Hall F, G & H
    Presenting Author: Amy Lee – MIT-Koch Institute
    Co-Author: Khanh Tran – MIT-Koch Institute
    Co-Author: alexander Hostetler – MIT-Koch Institute
    Co-Author: Kewen Lei – MIT-Koch Institute
    Co-Author: Jinbi Tian – MIT (EECS)
    Co-Author: Sevinj Mursalova – MIT-Koch Institute
    Primary Investigator: Robert Langer – MIT-Koch Institute
    Last Author: Ana Jaklenec, PhD – MIT-Koch Institute
    Biomanufacturing
  • Friday, Oct 10th
    10:00 AM - 11:00 AM PDT
    C6 - Heparan Sulfate-Collagen Multilayers Enhance Serum-Free MSC Expansion and Potency in Scalable Bioreactor Cultures
    Location: Exhibit Hall F, G & H
    Presenting Author: Carolina Rivera Crespo – University of Puerto Rico, Mayaguez
    Primary Investigator: Maribella Domenech – University of Puerto Rico
    Biomanufacturing
  • Friday, Oct 10th
    10:00 AM - 11:00 AM PDT
    C7 - FRET-based Synthetic Biology Approach for SUMOylation Cascade in Bacterial Cell and Interaction with Influenza A Virus
    Location: Exhibit Hall F, G & H
    Presenting Author: Shangwen Wu, n/a – Valencia High School, Placentia
    Presenting Author: Jacob Chen – Aliso Niguel High School
    Last Author: Jiayu Liao, PhD – University of California, Riverside
    Co-Author: David Y. Chen, n/a – Brea Olinda Highschool
    Co-Author: Julia H. Yuwen – Irvine Unified School District
    Co-Author: Kalvin Yuwen, Bachelor of Science – University of California, Irvine
    Co-Author: Chelsy Cervantes – Bioengineering at University of California, Riverside
    Co-Author: My Linh Le – University of California, Riverside
    Biomanufacturing
  • Friday, Oct 10th
    10:00 AM - 11:00 AM PDT
    C8 - Suspended Planar and Non-planar Tissue Patterning with Open Microfluidics: Engineering Biomimetic Tissue Architectures with Spatial and Mechanical Control
    Location: Exhibit Hall F, G & H
    Presenting Author: Amanda Haack, PhD – University of Washington
    Primary Investigator: Ashleigh Theberge – University of Washington
    Co-Author: Jamison Whitten – University of Washington
    Co-Author: Ella E. Bouker – University of Washington
    Co-Author: Liam Knudsen – University of Washington
    Co-Author: Lauren G. Brown – University of Washington
    Biomanufacturing
  • Friday, Oct 10th
    10:00 AM - 11:00 AM PDT
    C9 - A 3D-Printed Microfluidic Device for Scalable Cell Encapsulation and Spheroid Formation
    Location: Exhibit Hall F, G & H
    Presenting Author: Quoc Huynh Nguyen, PhD – Mayo Clinic
    Co-Author: Kianna Nguyen – Mayo Clinic
    Co-Author: Quang Tuan Che – Mayo Clinic
    Co-Author: Daheui Choi – Mayo Clinic
    Primary Investigator: Alexander Revzin – Mayo Clinic
    Biomanufacturing
  • Friday, Oct 10th
    10:00 AM - 11:00 AM PDT
    T1 - Development of Collagenous Filaments with Tuneable Mechanical Properties Using a 3D Bioprinter and Molecular Crowding
    Location: Exhibit Hall F, G & H
    Presenting Author: Alex Rossello – Yale University
    Primary Investigator: Michael Mak – Stony Brook University
    Biomanufacturing
  • Friday, Oct 10th
    10:00 AM - 11:00 AM PDT
    T2 - Engineering a Biomanufacturing Process for T Cell Therapies using Non-viral Delivery
    Location: Exhibit Hall F, G & H
    Presenting Author: Samara Rathod – University of California San Diego
    Co-Author: Rob Tressler
    Co-Author: Michael Tran
    Co-Author: Aniha V. Kumar
    Biomanufacturing
  • Friday, Oct 10th
    10:00 AM - 11:00 AM PDT
    T3 - Engineering an Ectopic Lymph Follicle Model to Probe Age-Dependent Vaccine Efficacy
    Location: Exhibit Hall F, G & H
    Presenting Author: Bhumi Suthar, MS – University of Miami
    Primary Investigator: Ashutosh Agarwal – University of Miami
    Last Author: Suresh Pallikuth – University of Miami
    Co-Author: Emma drabbe, MSc – University of Miami
    Biomanufacturing
  • Friday, Oct 10th
    10:00 AM - 11:00 AM PDT
    T3 - Tunable Endothelial Barrier Model for Investigating Vascular Dysfunction
    Location: Exhibit Hall F, G & H
    Presenting Author: Bhumi Suthar, MS – University of Miami
    Primary Investigator: Ashutosh Agarwal – University of Miami
    Co-Author: Emma Warrner – University of Pennsylvania
    Co-Author: David Oliver – Michigan State University College of Human Medicine
    Biomanufacturing
  • Friday, Oct 10th
    10:00 AM - 11:00 AM PDT
    T4 - High-density pluripotent stem cell expansion in a single-use bioreactor using HiDef-S8
    Location: Exhibit Hall F, G & H
    Presenting Author: Gerardo Aguirre Castillo, MSc – Defined Bioscience, Inc.
    Co-Author: Jerome Karpiak, PhD – Defined Bioscience, Inc.
    Co-Author: Justin Cesmat – Distek, Inc.
    Co-Author: Austin Ganz – Distek, Inc.
    Biomanufacturing
  • Friday, Oct 10th
    10:00 AM - 11:00 AM PDT
    T5 - Pluripotent Stem Cell Expansion in a Stirred-Tank Bioreactor: Optimization and Automation of Feeding Strategies for Achieving Economic Feasibility
    Location: Exhibit Hall F, G & H
    Presenting Author: Jerome Karpiak, PhD – Defined Bioscience, Inc.
    Primary Investigator: William Sousa Salvador, MSc – Instituto Superior Técnico at University of Lisbon
    Last Author: Carlos A.V. Rodrigues, PhD – Cell4Food
    Co-Author: Gerardo Aguirre Castillo, MSc – Defined Bioscience, Inc.
    Biomanufacturing
  • Friday, Oct 10th
    10:00 AM - 11:00 AM PDT
    T6 - Rapid Prototyping of Microphysiological System of Glioblastoma for Investigating Tumor Heterogeneity, Drug Resistance and Delivery
    Location: Exhibit Hall F, G & H
    Presenting Author: Sirjana Pun – University of Cincinnati
    Co-Author: Mona Mirheydari – University of Cincinnati
    Co-Author: Patrizia Tornabene – Cincinnati Children's
    Co-Author: Nithya Warrier – University of Cincinnati
    Co-Author: Samanta Paul – University of Cincinnati
    Co-Author: Cheick a t Sissoko, MS – University of Cincinnati
    Co-Author: Kimia Abedi, MSc – University of Cincinnati
    Co-Author: Daniel P. Krummel – University of North Carolina-Chapel Hill
    Co-Author: Soma Sengupta – University of North Carolina-Chapel Hill
    Co-Author: Kevin Haworth – University of Cincinnati
    Last Author: Riccardo Barrile – University of Cincinnati
    Biomanufacturing
  • Friday, Oct 10th
    10:00 AM - 11:00 AM PDT
    B12 - Mitigation of Biofilm Stagnation in Redox Mediated Yeast Microbial Fuel Cell
    Location: Exhibit Hall F, G & H
    Presenting Author: Hunter Lau – Santa Clara University
    Presenting Author: Ryan Lang – Santa Clara University
    Primary Investigator: Maryam Mobed-Miremadi, PhD Chemical Engineering – Santa Clara University
    Biomanufacturing
  • Friday, Oct 10th
    10:00 AM - 11:00 AM PDT
    B14 - Biofabrication of 3D Printed Artery-on-chip with ECM based bioink
    Location: Exhibit Hall F, G & H
    Presenting Author: Zhouquan Fu, PhD – BioMed X Institute
    Co-Author: Angelica Phelan – BioMed X Institute
    Co-Author: Serena Lucarelli – BioMed X Institute
    Co-Author: Soumya Mitra – Abbvie
    Co-Author: Sarah Wilson – Abbvie
    Co-Author: John Lindner – BioMed X Institute
    Last Author: Alicia Cutler – BioMed X Institute
    Primary Investigator: Alicia Cutler – BioMed X Institute
    Biomanufacturing
  • Friday, Oct 10th
    10:00 AM - 11:00 AM PDT
    B15 - Open-source Multi-Material DLP Bioprinter Design
    Location: Exhibit Hall F, G & H
    Presenting Author: Gene Felix – Gaharwar Laboratory
    Co-Author: Raza ur Rehman Syed, Phd Candidate – TX A&M College Station
    Last Author: Akhilesh Gaharwar – Texas A&M University
    Primary Investigator: Akhilesh Gaharwar – Texas A&M University
    Co-Author: Yuang Zhang – Texas A&M University
    Biomanufacturing
  • Friday, Oct 10th
    10:00 AM - 11:00 AM PDT
    B16 - Sargassum Derived Fermentable Substrates for Polyhydroxyalkanoate Biosynthesis
    Location: Exhibit Hall F, G & H
    Presenting Author: Brody St. Pierre – University of Massachusetts Dartmouth
    Panelist: Brody St. Pierre – University of Massachusetts Dartmouth
    Biomanufacturing
  • Friday, Oct 10th
    10:00 AM - 11:00 AM PDT
    R28 - Controlled Membrane Buckling to Pattern Complex Epithelial Morphology in Microphysiological Systems
    Location: Exhibit Hall F, G & H
    Presenting Author: Lydia Cybyk – University of Delaware
    Co-Author: Katherine M. Nelson – University of Delaware
    Primary Investigator: Jason P. Gleghorn – University of Delaware
    Biomanufacturing
  • Friday, Oct 10th
    10:00 AM - 11:00 AM PDT
    R29 - Rapid Manufacturing and Prototyping of 3D-printed Microfluidic Housings for 3D Endothelial Tissue Engineering
    Location: Exhibit Hall F, G & H
    Presenting Author: Claire Chung – Johns Hopkins University
    Co-Author: Claire Chung – Johns Hopkins University
    Co-Author: Lily Liang, PhD Candidate – Johns Hopkins University
    Co-Author: Aarushi Pant – Johns Hopkins University
    Primary Investigator: Peter Searson – Johns Hopkins University
    Biomanufacturing
  • Friday, Oct 10th
    10:00 AM - 11:00 AM PDT
    S40 - Development of a Microcarrier-Compatible Bioreactor for Mesenchymal Stromal Cell Expansion with Osteogenic Conditioning
    Location: Exhibit Hall F, G & H
    Presenting Author: Erika Brittany Bowen – University of Georgia
    Primary Investigator: Cheryl T. Gomillion, PhD – School of Chemical, Materials, and Biomedical Engineering, University of Georgia
    Biomanufacturing
  • Saturday, Oct 11th
    8:30 AM - 10:00 AM PDT
    Tissue and Organ Biomanufacturing
    Location: Room 24A
    Track Chair: Shengjie Zhai – University of Nevada Las Vegas
    Track Chair: Brenda M. Ogle, PhD – University of Minnesota
    Session Chair: Dake Hao, PhD – University of California Davis
    Session Chair: Lin Zhang, PhD – Department of Biomedical Engineering, University at Buffalo
    Biomanufacturing
  • Saturday, Oct 11th
    8:30 AM - 8:45 AM PDT
    Sonicated Inks and Focused Ultrasound Writing Enable Acoustic Volumetric Printing for Minimally Invasive Surgery
    Location: Room 24A
    Presenting Author: Xiao Kuang, PhD – University of Wisconsin-Madison
    Primary Investigator: Xiao Kuang, PhD – University of Wisconsin-Madison
    Biomanufacturing
  • Saturday, Oct 11th
    8:45 AM - 9:00 AM PDT
    Batch Manufacturing of Hepatocyte-laden Polyelectrolyte Microcapsules with Tunable Internal Environments using an Optimized Electrospray Technique.
    Location: Room 24A
    Presenting Author: Rafael Ramos, B.S Biomedical Engineering;M.S. Bioengineering – Wayne State University School of Medicine
    Primary Investigator: Howard W.T. Matthew, PhD – Wayne State University
    Biomanufacturing
  • Saturday, Oct 11th
    9:00 AM - 9:15 AM PDT
    Instant assembly of unmodified collagen for multiscale functional tissue engineering
    Location: Room 24A
    Presenting Author: Xiangyu Gong, PhD – Stony Brook University
    Co-Author: Zixie Liang – Yale University
    Co-Author: Zhang Wen – Yale University
    Co-Author: Michael Mak – Stony Brook University
    Primary Investigator: Michael Mak – Stony Brook University
    Biomanufacturing
  • Saturday, Oct 11th
    9:15 AM - 9:30 AM PDT
    SABER Bioprinting: Sequential Additive Biofabrication Extended Over Real-Time
    Location: Room 24A
    Presenting Author: Joshua Gershlak, PhD – Massachusetts General Hospital
    Biomanufacturing
  • Saturday, Oct 11th
    9:30 AM - 9:45 AM PDT
    Integration of an Innovative, Non-invasive, Long-lived, Robust Optical O2 Sensor into an Automated Manufacturing System
    Location: Room 24A
    Presenting Author: Mike Jacobs, MS, MS – DEKA Research and Development
    Presenting Author: Martine Behra, PhD – ARMI BioFabUSA
    Co-Author: Jim Berilla – Case Western Reserve University
    Co-Author: Richard McFarland, PhD, MD – ARMI BioFabUSA
    Co-Author: Jean Welter, MD PhD – Case Western Reserve University
    Co-Author: Tom Bollenbach, PhD – ARMI BioFabUSA
    Co-Author: Harihara Baskaran, PhD – CWRU
    Last Author: Harihara Baskaran, PhD – CWRU
    Biomanufacturing
  • Saturday, Oct 11th
    9:45 AM - 10:00 AM PDT
    Large Scale Manufacturing of Precisely Patterned Flexible Soft Tissue Grafts with High Porosity
    Location: Room 24A
    Presenting Author: Amal Shabazz – University of Maryland
    Co-Author: Alexandra P. Christensen – University of Maryland
    Co-Author: Julia Fitlin – University of Maryland
    Co-Author: Sahar Vakili – University of Maryland
    Co-Author: David Garvey – The LaunchPort
    Co-Author: Mike Pallotta – The LaunchPort
    Co-Author: Stephen L. Farias, PhD – Materic
    Last Author: John Fisher – University of Maryland
    Primary Investigator: John Fisher – University of Maryland
    Biomanufacturing
  • Saturday, Oct 11th
    10:00 AM - 2:30 PM PDT
    Biomanufacturing - Posters
    Location: Exhibit Hall F, G & H
    Biomanufacturing
  • Saturday, Oct 11th
    10:00 AM - 11:00 AM PDT
    N17 - Computational Modeling of a Two-Layer Cross Channel Micromixer using Rheological Data
    Location: Exhibit Hall F, G & H
    Presenting Author: Nicole Balsz – Harvey Mudd College
    Co-Author: Nicole Balsz – Harvey Mudd College
    Co-Author: Liam Graham – Harvey Mudd College
    Co-Author: Nyah Hamilton – Harvey Mudd College
    Co-Author: Julia Kolt – Harvey Mudd College
    Primary Investigator: STEVEN SANTANA – Harvey Mudd College
    Biomanufacturing
  • Saturday, Oct 11th
    10:00 AM - 11:00 AM PDT
    N19 - Development of a Deconvolutional Pipeline for Live-Cardiomyocyte Imaging to Monitor Epigenetic State and Dynamics
    Location: Exhibit Hall F, G & H
    Presenting Author: Jonathan Staebell – NSF Center for Cell Manufacturing Technologies (CMaT)
    Co-Author: Xiangyu Zhang – University of Georgia
    Co-Author: Rabindranath De La Fuente – University of Georgia
    Primary Investigator: Rabindranath De La Fuente – University of Georgia
    Biomanufacturing
  • Saturday, Oct 11th
    10:00 AM - 11:00 AM PDT
    N20 - Engineering Teratomas Enriched in Skeletal Muscle
    Location: Exhibit Hall F, G & H
    Presenting Author: Miriam Khalil – Cal Poly Pomona
    Primary Investigator: Prashant Mali – University of California, San Diego
    Co-Author: Hammza Khaliq – University of California, San Diego
    Biomanufacturing
  • Saturday, Oct 11th
    10:00 AM - 11:00 AM PDT
    N22 - Secretome Profiling to Characterize Bioreactor-conditioned Mesenchymal Stromal Cells
    Location: Exhibit Hall F, G & H
    Presenting Author: Sydney Nierstedt – Binghamton University Biomedical Department
    Co-Author: Erika Brittany Bowen – University of Georgia
    Primary Investigator: Cheryl T. Gomillion, PhD – School of Chemical, Materials, and Biomedical Engineering, University of Georgia
    Biomanufacturing